SOMAFIX GASKET MAKER – FOR METAL SURFACES GENERAL PURPOSE S-074

Kind: 50 ml

Color: Light Orange

DETAILS / SPECIFICATIONS

Description:
Anaerobic glue-sealant of orange color for the formation of elastic gaskets, general purpose in the form of a thick paste. Fills the gaps between two parts and forms an elastic connection. Ensures tightness and waterproofness at low pressure immediately after application. Flexible and drip-free.

FEATURES:
-For metal fasteners
-Can be reused
-Thixotropic, does not spread on the surface after application
-Prevents corrosion of assembled parts
-Medium strength provides a reliable connection
-High viscosity facilitates uniform distribution of glue during application
-Fills gaps up to 0.5 mm, providing a thorough coating
-Resistance to vibrations makes it ideal for use in conditions with intense vibrations

FIELD OF APPLICATION:
-Fuel and water pumps, bearing units, engine thermostats, air compressors, pumps of various applications, fuel tanks, etc.
-Ideal for sealing flanges in gearboxes, engines. Can be used on top of other pads.
-The product is not recommended for use in the environment of pure oxygen, chlorine and other strong oxidizers.
-The product is not recommended to be used on plastics, especially thermoplastics, due to the possibility of their destruction.
-If such use is necessary, the compatibility of the product with the material of the contact surfaces should be checked in advance.

INSTRUCTIONS FOR USE:
To achieve the best effect, the surface of the flanges must be cleaned and degreased. When using special means for cleaning the surface, before using the product, it is necessary to check their compatibility with washing solutions. In some cases, cleaning solutions can have a negative effect on the properties of the product. The product is intended for tight sealing of flange joints with a gap of up to 0.5 mm. Apply a continuous roller of the product by hand or screen printing to the surface of one of the flanges. The tightness test after assembly is carried out with low pressure (<0.5 MPa) to control the optimal filling of all micro-irregularities with the product. Tighten the flanges immediately after assembly to avoid an adhesive gap between them.

WHY IS THIS AN INNOVATIVE PRODUCT?
Anaerobic adhesive sealant is an advanced material with one component and a solvent. The product is specially designed for sealing, fixing, metal or metal-coated joints. Anaerobic glue is stable when in contact with oxygen in the air. When the product is placed between two compounds where contact with oxygen disappears, polymerization begins and a polymer layer is formed

Shelf Life:
36 months. Production date is on the product.

Technical data (23°C RH %50)

Basis: Methacrylate ether
Appearance: Paste
Viscosity: Medium and thixotropic
Strength: High
Thermal Resistance: -50°C;+150°C
Density: 1.08 g/cm³
Flash point: >93°C
Storage temperature: from +5 to +30°C
Primary seizure time: Brass: 2-3 min
Primary seizure time: Steel: 8-10 min
Primary seizure time: Stainless steel: 10-12 min
Primary seizure time: Galvanized steel: 7-8 min
Primary seizure time: Aluminum: 20-35 min
Average time of functional freezing: from 4 to 6 hours
Average time of complete freezing: from 8 to 12 hours
After solidification after 24 hours, shear strength of steel: 7.2 N/mm2